Sawblade 250 x 3.0 x 30 mm x 100T for NF-metal and PVC
Cross section: 250 mm
Number of teeth: 100
Cutting width: 2.8 mm
Thickness saw blade: 1.8 mm
Hole: 30 mm
Reduction rings: 16 mm, 20 mm, 25.4 mm
Maximum speed: 4.800 r.p.m.
EN 847-1
Tungsten carbide saw blade (TCT)
Trapezoid tooth (TCG) with positive rake angle
The trapezoid tooth saws are especially suitable for HPL, these blades alternately have a flat surface and a roof edge which are at a negative angle. These blades are also suitable for sawing non-ferrous metals and PVC.
The laser cut expansion slots are designed to avoid harmful mechanical stresses and warping, the blade stays perfectly flat.
Number of teeth: 100
Cutting width: 2.8 mm
Thickness saw blade: 1.8 mm
Hole: 30 mm
Reduction rings: 16 mm, 20 mm, 25.4 mm
Maximum speed: 4.800 r.p.m.
EN 847-1
Tungsten carbide saw blade (TCT)
Trapezoid tooth (TCG) with positive rake angle
The trapezoid tooth saws are especially suitable for HPL, these blades alternately have a flat surface and a roof edge which are at a negative angle. These blades are also suitable for sawing non-ferrous metals and PVC.
The laser cut expansion slots are designed to avoid harmful mechanical stresses and warping, the blade stays perfectly flat.
Article number
11410
Vervangend artikel | 11415 |
---|---|
Brand | ToolTech |